EN
Cold spray road marking machines are one of the special equipment we have to help paint lines on roads. These machines use air to spray the road with cold paint. It dries quickly and makes bright lines that help keep drivers safe.
PREPARING TO USE THE MACHINE
CB/T 3552 72 Before using cold sprayed road marking machine, it should be ensured that it is clean and the performance is normal. Inspect the machine for any damage or clogs which might present an issue. Also, ensure you have plenty of paint and the machine is properly configured.
Instructions for Using of Cold Paint Spray Road Marking Machine
Fill the machine’s paint tank with the color of your choice.
Turn on the machine and adjust the air pressure as necessary.
sWeight the machine down at the position you wish to paint your line.
Pull the trigger and start the paint flicking on the road.
Run the machine slowly up and down the line with a constant, steady hand.
Release the trigger to stop spraying when you get to the end of the line.
Tips for Making Clean Lines
To create tidy, clean lines, keep these guidelines in mind:
Continue to drag the machine while maintaining a consistent speed and pressure.
Don’t allow the paint to stop and start or you will have a series of uneven lines.
Use a practice surface to paint straight lines by making pale or faded lines on the road.
Keep the machine clean or you may have clogs and the paint job may be uneven.
Using the Machine Safely
Here are some safety considerations you’ll want to keep in mind when working with a cold spray road marking machine:
Wear safety equipment, such as gloves and goggles, at all times.
Use warning signs and cones to tell drivers you’re working.
Be mindful of traffic and people when painting lines.
Clean and oil the machine properly after every use so that paint does not accumulate.
In short, Thermoplastic Road Marking Machine road spray marking machines are essential equipment to draw lines on roads. By anticipating their effects and preparing carefully, you can control them to create clean lines. Just make sure to be safe and use the machine as you should. It takes time but you will get really good at those things marking the road!
